
Inhalt
Ziele des Projekts
- Datum und Zeit anzeigen
- die Messdaten eines DHT-Sensors darstellen
- Piktogramme neben den Daten platzieren
| TFT 160x128 | TFT 320x240 |
![]() | ![]() |
Benötigte Bauteile
- ESP32-Mikrocontroller oder ESP8266-Mikrocontroller
- DHT11/DHT22 Temperatursensoren
- Leitungsdrähte
Konfiguration der Mikrocontroller
Hardware
Ansteuerung verschiedener TFT-Displays
⇒ TFT-Display mit 160x128 Pixeln
⇒ TFT-Display mit 320x240 Pixeln
Schriften und Bitmaps
DHT-Sensor

Die Sensoren DHT11 und DHT22 messen Temperatur und Luftfeuchtigkeit
Vergleich DHT11/DHT22/DHT20
| DHT11 | DHT22 | DHT20 | |
|---|---|---|---|
| Messbereich Temperatur | 0 — +50°C | -40 — +80°C | -40 — +80°C |
| Auflösung Temperatur | 1°C | 0,1°C | 0,01°C |
| Messgenauigkeit Temperatur | ± 2 °C | ± 0,5 °C | ± 0,5 °C |
| Messbereich Luftfeuchtigkeit | 20 — 90% | 0 — 100% | 0 — 100% |
| Auflösung Luftfeuchtigkeit | 1% | 0,1% | 0,024% |
| Messgenauigkeit Luftfeuchtigkeit | ± 5 % | ± 2 % | ± 3 % |
| Schnittstelle | digital | digital | I²C |
Benötigte Bibliotheken



Programm für TFT-Display mit 160x128 Pixel
Du musst die SPI-Pins anpassen.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 | #ifdef ESP8266 #include “ESP8266WiFi.h” #else #include “WiFi.h” #endif #include “time.h” #include “Adafruit_ST7735.h” #include “U8g2_for_Adafruit_GFX.h” #include “DHT.h” // freier digitaler Pin für DHT int SENSOR_DHT = 11; // Sensortyp festlegen // DHT22 #define SensorTyp DHT22 // DHT11 // #define SensorTyp DHT11 // Sensor einen Namen zuweisen DHT dht(SENSOR_DHT, SensorTyp); // Wemos D1 Mini // #define TFT_CS D8 // #define TFT_RST D1 // #define TFT_DC D2 // XIAO // #define TFT_CS D7 // #define TFT_RST D1 // #define TFT_DC D2 // Arduino Nano ESP 32 // #define TFT_CS 10 // #define TFT_RST 9 // #define TFT_DC 8 // ESP32-C6 // #define TFT_CS 18 // #define TFT_RST 3 // #define TFT_DC 2 // ESP32-WROOM // #define TFT_CS 5 // #define TFT_RST 4 // #define TFT_DC 2 Adafruit_ST7735 tft = Adafruit_ST7735(TFT_CS, TFT_DC, TFT_RST); char Router[] = “Router_SSID”; char Passwort[] = “xxxxxxxx”; // NTP-Server aus dem Pool #define Zeitserver “de.pool.ntp.org” /* Liste der Zeitzonen https://github.com/nayarsystems/posix_tz_db/blob/master/zones.csv Zeitzone CET = Central European Time ‑1 -> 1 Stunde zurück CEST = Central European Summer Time von M3 = März, 5.0 = Sonntag 5. Woche, 02 = 2 Uhr bis M10 = Oktober, 5.0 = Sonntag 5. Woche 03 = 3 Uhr */ #define Zeitzone “CET-1CEST,M3.5.0/02,M10.5.0/03” // time_t enthält die Anzahl der Sekunden seit dem 1.1.1970 0 Uhr time_t aktuelleZeit; /* Struktur tm tm_hour -> Stunde: 0 bis 23 tm_min -> Minuten: 0 bis 59 tm_sec -> Sekunden 0 bis 59 tm_mday -> Tag 1 bis 31 tm_mon -> Monat: 0 (Januar) bis 11 (Dezember) tm_year -> Jahre seit 1900 tm_yday -> vergangene Tage seit 1. Januar des Jahres tm_isdst -> Wert > 0 = Sommerzeit (dst = daylight saving time) */ tm Zeit; WiFiServer Server(80); WiFiClient Client; // Objekt u8g2Schriften U8G2_FOR_ADAFRUIT_GFX u8g2Schriften; // Bitmaps const unsigned char Kalender [] PROGMEM = { // ‘Kalender_30x35, 30x35px 0x7f, 0xff, 0xff, 0xf8, 0xff, 0xfc, 0xff, 0xfc, 0xff, 0xff, 0xff, 0xfc, 0xff, 0xff, 0xff, 0xfc, 0xff, 0xff, 0xff, 0xfc, 0xff, 0xff, 0xff, 0xfc, 0xff, 0xff, 0xff, 0xfc, 0xff, 0xff, 0xff, 0xfc, 0xff, 0xff, 0xff, 0xfc, 0x80, 0x00, 0x00, 0x04, 0x80, 0x00, 0x00, 0x04, 0x8e, 0x00, 0x01, 0xc4, 0x8e, 0x00, 0x01, 0xc4, 0x8e, 0x00, 0x01, 0xc4, 0x80, 0x00, 0x00, 0x04, 0x80, 0x00, 0x00, 0x04, 0x80, 0x00, 0x00, 0x04, 0x80, 0x00, 0x00, 0x04, 0x80, 0x00, 0x00, 0x04, 0x80, 0x00, 0x00, 0x04, 0x80, 0x00, 0x00, 0x04, 0x80, 0x00, 0x00, 0x04, 0x80, 0x00, 0x00, 0x04, 0x80, 0x00, 0x00, 0x04, 0x80, 0x00, 0x00, 0x04, 0x80, 0x00, 0x00, 0x04, 0x80, 0x00, 0x00, 0x04, 0x80, 0x00, 0x00, 0x04, 0x8e, 0x00, 0x01, 0xc4, 0x8e, 0x00, 0x01, 0xc4, 0x8e, 0x00, 0x01, 0xc4, 0x80, 0x00, 0x00, 0x04, 0x80, 0x00, 0x00, 0x04, 0x80, 0x00, 0x00, 0x04, 0xff, 0xff, 0xff, 0xfc }; const unsigned char Uhr [] PROGMEM = { // ‘Uhr_30x30, 30x30px 0x00, 0x1f, 0xe0, 0x00, 0x00, 0x7f, 0xf8, 0x00, 0x01, 0xf0, 0x3e, 0x00, 0x07, 0x80, 0x07, 0x80, 0x0f, 0x03, 0x03, 0xc0, 0x1c, 0x60, 0x18, 0xe0, 0x18, 0x00, 0x00, 0x60, 0x38, 0x01, 0x00, 0x70, 0x30, 0x01, 0x00, 0x30, 0x63, 0x01, 0x01, 0x98, 0x60, 0x01, 0x00, 0x18, 0xe0, 0x01, 0x00, 0x1c, 0xc0, 0x01, 0x00, 0x0c, 0xc0, 0x01, 0x00, 0x0c, 0xcc, 0x01, 0x00, 0xcc, 0xc0, 0x02, 0x00, 0x0c, 0xc0, 0x0c, 0x00, 0x0c, 0xc0, 0x30, 0x00, 0x0c, 0xe0, 0xc0, 0x00, 0x1c, 0x66, 0x00, 0x01, 0x98, 0x60, 0x00, 0x00, 0x18, 0x70, 0x00, 0x00, 0x38, 0x38, 0x00, 0x00, 0x70, 0x18, 0x60, 0x10, 0x60, 0x1c, 0x00, 0x00, 0xe0, 0x0f, 0x03, 0x03, 0xc0, 0x07, 0x80, 0x07, 0x80, 0x01, 0xf0, 0x3e, 0x00, 0x00, 0x7f, 0xfc, 0x00, 0x00, 0x1f, 0xe0, 0x00 }; const unsigned char Thermometer [] PROGMEM = { // ‘Thermometer_19x40, 19x40px 0x01, 0xe0, 0x00, 0x03, 0xf8, 0x00, 0x06, 0x0c, 0x00, 0x04, 0x04, 0x00, 0x08, 0x04, 0x00, 0x08, 0x04, 0x00, 0x18, 0x04, 0x00, 0x08, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x18, 0x04, 0x00, 0x08, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x18, 0x04, 0x00, 0x08, 0x04, 0x00, 0x00, 0xe4, 0x00, 0x00, 0xe4, 0x00, 0x38, 0xe4, 0x00, 0x00, 0xe4, 0x00, 0x00, 0xe4, 0x00, 0x00, 0xe4, 0x00, 0x00, 0xe4, 0x00, 0x18, 0xe7, 0x00, 0x30, 0xe3, 0x80, 0x21, 0xe1, 0x80, 0x63, 0xf8, 0xc0, 0x47, 0xf8, 0xc0, 0x47, 0xfc, 0x40, 0xc7, 0xfc, 0x60, 0xc7, 0xfc, 0x60, 0xc7, 0xfc, 0x60, 0x47, 0xfc, 0x40, 0x63, 0xf8, 0xc0, 0x61, 0xf0, 0xc0, 0x30, 0x01, 0x80, 0x10, 0x03, 0x00, 0x0e, 0x0e, 0x00, 0x07, 0xfc, 0x00, 0x00, 0xe0, 0x00 }; const unsigned char Regen [] PROGMEM = { // ‘Regen_43x35, 43x35px 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x22, 0x22, 0x21, 0x00, 0x00, 0x00, 0x66, 0x22, 0x23, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x03, 0x11, 0x11, 0x19, 0x10, 0x00, 0x02, 0x00, 0x01, 0x11, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11, 0x11, 0x08, 0x08, 0x88, 0x80, 0x31, 0x11, 0x19, 0x18, 0x89, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x88, 0x8c, 0x88, 0xc4, 0xcc, 0xc0, 0x08, 0x88, 0x88, 0x04, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x80, 0x00, 0x23, 0x33, 0x11, 0x11, 0x99, 0x00, 0x20, 0x20, 0x11, 0x10, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x09, 0x88, 0x88, 0x88, 0x88, 0x00, 0x01, 0x08, 0x98, 0x88, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x44, 0x44, 0x46, 0x00, 0x00, 0x00, 0x04, 0x44, 0x46, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; void setup() { // Zeitzone: Parameter für die zu ermittelnde Zeit configTzTime(Zeitzone, Zeitserver); Serial.begin(9600); // auf serielle Verbindung warten while (!Serial); delay(1000); // WiFi starten WiFi.mode(WIFI_STA); WiFi.begin(Router, Passwort); Serial.println(“————————”); while (WiFi.status() != WL_CONNECTED) { delay(200); Serial.print(“.”); } Serial.println(); Serial.print(“Verbunden mit ”); Serial.println(Router); Serial.print(“IP über DHCP: ”); Serial.println(WiFi.localIP()); // Schriften von u8g2 tft zuordnen u8g2Schriften.begin(tft); // Zufallsgenerator starten randomSeed(analogRead(A0)); Serial.begin(9600); delay(500); Serial.println(“Bildschirm: ” + String(tft.height()) + ” x ” + String(tft.width())); // TFT starten tft.initR(INITR_BLACKTAB); // Rotation anpassen tft.setRotation(2); // Bitmaps anzeigen tft.fillScreen(ST77XX_BLACK); tft.drawBitmap(1, 1, Kalender, 30, 35, ST77XX_WHITE); tft.drawBitmap(1, 40, Uhr, 30, 30, ST77XX_WHITE); tft.drawBitmap(10, 75, Thermometer, 19, 40, ST77XX_WHITE); tft.drawBitmap(1, 121, Regen, 43, 35, ST77XX_WHITE); // Sensor starten dht.begin(); } void loop() { // aktuelle Zeit holen time(&aktuelleZeit); // localtime_r -> Zeit in die lokale Zeitzone setzen localtime_r(&aktuelleZeit, &Zeit); // Temperatur lesen String Temperatur = String(dht.readTemperature()); // replace -> . durch , ersetzen Temperatur.replace(“.”, “,”); // Luftfeuchtigkeit lesen String Luftfeuchtigkeit = String(dht.readHumidity()); // replace -> . durch , ersetzen Luftfeuchtigkeit.replace(“.”, “,”); // nur den Bereich der Daten schwärzen tft.fillRect(45, 1, tft.width(), tft.height(), ST77XX_BLACK); u8g2Schriften.setForegroundColor(ST77XX_WHITE); u8g2Schriften.setBackgroundColor(ST77XX_BLACK); u8g2Schriften.setFont(u8g2_font_helvB12_te); u8g2Schriften.setCursor(48, 20); // Tag: führende 0 ergänzen if (Zeit.tm_mday < 10) { u8g2Schriften.print(“0”); } u8g2Schriften.print(Zeit.tm_mday); u8g2Schriften.print(“.”); // Monat: führende 0 ergänzen if (Zeit.tm_mon < 9) { u8g2Schriften.print(“0”); } u8g2Schriften.print(Zeit.tm_mon + 1); u8g2Schriften.print(“.”); // Anzahl Jahre seit 1900 u8g2Schriften.print(Zeit.tm_year + 1900); u8g2Schriften.print(“ ”); u8g2Schriften.setCursor(48, 60); // Stunde: wenn Stunde < 10 -> 0 davor setzen if (Zeit.tm_hour < 10) u8g2Schriften.print(“0”); u8g2Schriften.print(Zeit.tm_hour); u8g2Schriften.print(“:”); // Minuten if (Zeit.tm_min < 10) u8g2Schriften.print(“0”); u8g2Schriften.print(Zeit.tm_min); // Messdaten anzeigen u8g2Schriften.setCursor(48, 100); u8g2Schriften.print(Temperatur + ” °C”); u8g2Schriften.setCursor(48, 140); u8g2Schriften.print(Luftfeuchtigkeit + ” %”); delay(10000); } |
Programm für TFT mit 320x240 Pixel
Ab Zeile 59 musst du die SPI-Pins anpassen.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 | #ifdef ESP8266 #include “ESP8266WiFi.h” #else #include “WiFi.h” #endif #include “Adafruit_ILI9341.h” #include “time.h” #include “U8g2_for_Adafruit_GFX.h” #include “DHT.h” // freier digitaler Pin für DHT int SENSOR_DHT = D3; // Sensortyp festlegen // DHT22 #define SensorTyp DHT22 // DHT11 // #define SensorTyp DHT11 // Sensor einen Namen zuweisen DHT dht(SENSOR_DHT, SensorTyp); char Router[] = “Router_SSID”; char Passwort[] = “xxxxxxxx”; // NTP-Server aus dem Pool #define Zeitserver “de.pool.ntp.org” /* Liste der Zeitzonen https://github.com/nayarsystems/posix_tz_db/blob/master/zones.csv Zeitzone CET = Central European Time ‑1 -> 1 Stunde zurück CEST = Central European Summer Time von M3 = März, 5.0 = Sonntag 5. Woche, 02 = 2 Uhr bis M10 = Oktober, 5.0 = Sonntag 5. Woche 03 = 3 Uhr */ #define Zeitzone “CET-1CEST,M3.5.0/02,M10.5.0/03” // time_t enthält die Anzahl der Sekunden seit dem 1.1.1970 0 Uhr time_t aktuelleZeit; /* Struktur tm tm_hour -> Stunde: 0 bis 23 tm_min -> Minuten: 0 bis 59 tm_sec -> Sekunden 0 bis 59 tm_mday -> Tag 1 bis 31 tm_mon -> Monat: 0 (Januar) bis 11 (Dezember) tm_year -> Jahre seit 1900 tm_yday -> vergangene Tage seit 1. Januar des Jahres tm_isdst -> Wert > 0 = Sommerzeit (dst = daylight saving time) */ tm Zeit; WiFiServer Server(80); WiFiClient Client; // ESP32-C6 // #define TFT_CS 18 // #define TFT_RST 3 // #define TFT_DC 2 // ESP32-Wroom // #define TFT_CS 5 // #define TFT_RST 22 // #define TFT_DC 2 // Wemos D1 Mini/NodeMCU // #define TFT_CS D8 // #define TFT_RST D1 // #define TFT_DC D2 Adafruit_ILI9341 tft = Adafruit_ILI9341(TFT_CS, TFT_DC, TFT_RST); // Objekt u8g2Schriften U8G2_FOR_ADAFRUIT_GFX u8g2Schriften; // Bitmaps const unsigned char Uhr [] PROGMEM = { // ‘Uhr, 50x50px 0x00, 0x00, 0x0f, 0xfc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xff, 0xc0, 0x00, 0x00, 0x00, 0x03, 0xff, 0xff, 0xf0, 0x00, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xfc, 0x00, 0x00, 0x00, 0x1f, 0xe0, 0x01, 0xfe, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x00, 0x3f, 0x80, 0x00, 0x00, 0xfe, 0x00, 0x00, 0x1f, 0xc0, 0x00, 0x01, 0xf8, 0x00, 0x00, 0x07, 0xe0, 0x00, 0x03, 0xf0, 0x00, 0xc0, 0x03, 0xf0, 0x00, 0x07, 0xc0, 0x00, 0x00, 0x00, 0xf8, 0x00, 0x07, 0x80, 0xc0, 0x00, 0x40, 0x78, 0x00, 0x0f, 0x80, 0x00, 0x00, 0x00, 0x7c, 0x00, 0x1f, 0x00, 0x00, 0x80, 0x00, 0x3e, 0x00, 0x1e, 0x00, 0x00, 0xc0, 0x00, 0x1e, 0x00, 0x3e, 0x00, 0x00, 0xc0, 0x00, 0x1f, 0x00, 0x3c, 0x00, 0x00, 0xc0, 0x00, 0x0f, 0x00, 0x38, 0x30, 0x00, 0xc0, 0x01, 0x07, 0x00, 0x78, 0x00, 0x00, 0xc0, 0x00, 0x07, 0x80, 0x78, 0x00, 0x00, 0xc0, 0x00, 0x07, 0x80, 0x70, 0x00, 0x00, 0xc0, 0x00, 0x03, 0x80, 0xf0, 0x00, 0x00, 0xc0, 0x00, 0x03, 0xc0, 0xf0, 0x00, 0x00, 0xc0, 0x00, 0x03, 0xc0, 0xf0, 0x00, 0x00, 0xc0, 0x00, 0x03, 0xc0, 0xf0, 0x00, 0x00, 0xc0, 0x00, 0x03, 0xc0, 0xf1, 0x80, 0x00, 0xc0, 0x00, 0x63, 0xc0, 0xf1, 0x80, 0x01, 0x80, 0x00, 0x63, 0xc0, 0xf0, 0x00, 0x07, 0x00, 0x00, 0x03, 0xc0, 0xf0, 0x00, 0x1c, 0x00, 0x00, 0x03, 0xc0, 0xf0, 0x00, 0x78, 0x00, 0x00, 0x03, 0xc0, 0xf0, 0x00, 0xe0, 0x00, 0x00, 0x03, 0xc0, 0x70, 0x03, 0x80, 0x00, 0x00, 0x03, 0x80, 0x78, 0x07, 0x00, 0x00, 0x00, 0x07, 0x80, 0x78, 0x00, 0x00, 0x00, 0x00, 0x07, 0x80, 0x78, 0x20, 0x00, 0x00, 0x01, 0x07, 0x80, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x3e, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x00, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x00, 0x0f, 0x80, 0x00, 0x00, 0x00, 0x7c, 0x00, 0x07, 0x80, 0x80, 0x00, 0xc0, 0x78, 0x00, 0x07, 0xc0, 0x00, 0x00, 0x00, 0xf8, 0x00, 0x03, 0xf0, 0x00, 0xc0, 0x03, 0xf0, 0x00, 0x01, 0xf8, 0x00, 0xc0, 0x07, 0xe0, 0x00, 0x00, 0xfe, 0x00, 0x00, 0x1f, 0xc0, 0x00, 0x00, 0x7f, 0x00, 0x00, 0x3f, 0x80, 0x00, 0x00, 0x1f, 0xe0, 0x01, 0xfe, 0x00, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xfc, 0x00, 0x00, 0x00, 0x03, 0xff, 0xff, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xff, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x0f, 0xfc, 0x00, 0x00, 0x00 }; const unsigned char Thermometer [] PROGMEM = { // ‘Thermometer, 34x70px 0x00, 0x07, 0xf0, 0x00, 0x00, 0x00, 0x0f, 0xfc, 0x00, 0x00, 0x00, 0x3f, 0xfe, 0x00, 0x00, 0x00, 0x7c, 0x0f, 0x00, 0x00, 0x00, 0x70, 0x07, 0x80, 0x00, 0x00, 0xe0, 0x03, 0xc0, 0x00, 0x00, 0xe0, 0x01, 0xc0, 0x00, 0x01, 0xc0, 0x01, 0xc0, 0x00, 0x01, 0xc0, 0x01, 0xc0, 0x00, 0x01, 0xc0, 0x01, 0xc0, 0x00, 0x01, 0xc0, 0x01, 0xc0, 0x00, 0x0f, 0xc0, 0x01, 0xc0, 0x00, 0x0f, 0xc0, 0x01, 0xc0, 0x00, 0x01, 0xc0, 0x01, 0xc0, 0x00, 0x00, 0xc0, 0x01, 0xc0, 0x00, 0x00, 0xc0, 0x01, 0xc0, 0x00, 0x00, 0xc0, 0x01, 0xc0, 0x00, 0x00, 0xc0, 0x01, 0xc0, 0x00, 0x0f, 0xc0, 0x01, 0xc0, 0x00, 0x0f, 0xc0, 0x01, 0xc0, 0x00, 0x01, 0xc0, 0x01, 0xc0, 0x00, 0x00, 0xc0, 0x01, 0xc0, 0x00, 0x00, 0xc0, 0x01, 0xc0, 0x00, 0x00, 0xc0, 0x01, 0xc0, 0x00, 0x00, 0xc0, 0x01, 0xc0, 0x00, 0x0f, 0xc0, 0x01, 0xc0, 0x00, 0x0f, 0xc0, 0x01, 0xc0, 0x00, 0x01, 0xc0, 0x01, 0xc0, 0x00, 0x00, 0xc3, 0xe1, 0xc0, 0x00, 0x00, 0xc3, 0xf1, 0xc0, 0x00, 0x00, 0xc3, 0xf1, 0xc0, 0x00, 0x0f, 0xc3, 0xf1, 0xc0, 0x00, 0x0f, 0xc3, 0xf1, 0xc0, 0x00, 0x0f, 0xc3, 0xf1, 0xc0, 0x00, 0x00, 0xc3, 0xf1, 0xc0, 0x00, 0x00, 0xc3, 0xf1, 0xc0, 0x00, 0x00, 0xc3, 0xf1, 0xc0, 0x00, 0x00, 0xc3, 0xf1, 0xc0, 0x00, 0x00, 0xc3, 0xf1, 0xc0, 0x00, 0x00, 0xc3, 0xf1, 0xc0, 0x00, 0x03, 0xc3, 0xf1, 0xf0, 0x00, 0x07, 0xc3, 0xf0, 0xf8, 0x00, 0x0f, 0x03, 0xf0, 0x7c, 0x00, 0x0e, 0x03, 0xe0, 0x3c, 0x00, 0x1c, 0x07, 0xf0, 0x1e, 0x00, 0x3c, 0x1f, 0xfc, 0x0f, 0x00, 0x38, 0x3f, 0xfe, 0x0f, 0x00, 0x78, 0x7f, 0xff, 0x07, 0x80, 0x70, 0x7f, 0xff, 0x87, 0x80, 0x70, 0x7f, 0xff, 0x83, 0x80, 0xf0, 0xff, 0xff, 0x83, 0xc0, 0xf0, 0xff, 0xff, 0xc3, 0xc0, 0xf0, 0xff, 0xff, 0xc3, 0xc0, 0xf0, 0xff, 0xff, 0xc3, 0xc0, 0xf0, 0xff, 0xff, 0xc3, 0xc0, 0xf0, 0xff, 0xff, 0x83, 0xc0, 0x70, 0x7f, 0xff, 0x83, 0x80, 0x70, 0x7f, 0xff, 0x87, 0x80, 0x78, 0x3f, 0xff, 0x07, 0x80, 0x38, 0x3f, 0xfe, 0x0f, 0x00, 0x3c, 0x0f, 0xfc, 0x0f, 0x00, 0x1e, 0x03, 0xe0, 0x1e, 0x00, 0x1f, 0x00, 0x00, 0x3e, 0x00, 0x0f, 0x00, 0x00, 0x7c, 0x00, 0x07, 0xe0, 0x01, 0xf8, 0x00, 0x03, 0xf8, 0x07, 0xf0, 0x00, 0x00, 0xff, 0xff, 0xc0, 0x00, 0x00, 0x7f, 0xff, 0x80, 0x00, 0x00, 0x1f, 0xfe, 0x00, 0x00, 0x00, 0x03, 0xf0, 0x00, 0x00 }; const unsigned char Regen [] PROGMEM = { // ‘Regen, 60x49px 0x00, 0x00, 0x00, 0x08, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x08, 0x21, 0x04, 0x10, 0x00, 0x00, 0x00, 0x06, 0x18, 0x63, 0x0c, 0x30, 0x80, 0x00, 0x00, 0x06, 0x10, 0x63, 0x0c, 0x31, 0x80, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x84, 0x10, 0x41, 0x08, 0x20, 0x00, 0x00, 0x61, 0x8c, 0x30, 0xc3, 0x18, 0x60, 0x00, 0x08, 0xc1, 0x8c, 0x30, 0xc3, 0x18, 0x61, 0x00, 0x00, 0x41, 0x04, 0x20, 0x82, 0x08, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x30, 0x86, 0x18, 0x43, 0x04, 0x30, 0x80, 0x18, 0x71, 0x86, 0x18, 0xc3, 0x0c, 0x31, 0x80, 0x18, 0x21, 0x84, 0x10, 0xc3, 0x0c, 0x21, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x18, 0x21, 0x04, 0x10, 0x42, 0x18, 0x40, 0x86, 0x18, 0x63, 0x0c, 0x30, 0xc6, 0x18, 0xc0, 0x86, 0x10, 0x63, 0x0c, 0x30, 0xc6, 0x18, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x21, 0x04, 0x10, 0xc2, 0x0c, 0x21, 0x00, 0x30, 0x63, 0x0c, 0x31, 0xc6, 0x0c, 0x63, 0x00, 0x30, 0x63, 0x0c, 0x31, 0x86, 0x18, 0x63, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x10, 0x43, 0x08, 0x20, 0x86, 0x10, 0x00, 0x06, 0x30, 0xc3, 0x18, 0x61, 0x86, 0x30, 0x00, 0x04, 0x30, 0xc2, 0x18, 0x61, 0x8c, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x80, 0x00, 0x00, 0x0c, 0x30, 0xc6, 0x18, 0x61, 0x00, 0x00, 0x00, 0x00, 0x61, 0xc6, 0x18, 0x60, 0x00, 0x00, 0x00, 0x00, 0x60, 0x86, 0x10, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; const unsigned char Kalender [] PROGMEM = { // ‘Kalender, 51x60px 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0xff, 0xff, 0xff, 0x1f, 0xff, 0xff, 0xe0, 0xff, 0xff, 0xff, 0x1f, 0xff, 0xff, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0xf0, 0x00, 0x00, 0x01, 0xe0, 0x60, 0x81, 0xf8, 0x00, 0x00, 0x03, 0xf0, 0x60, 0x81, 0xf8, 0x00, 0x00, 0x03, 0xf0, 0x60, 0x81, 0xf8, 0x00, 0x00, 0x03, 0xf0, 0x60, 0x81, 0xf8, 0x00, 0x00, 0x03, 0xf0, 0x60, 0x80, 0xf0, 0x00, 0x00, 0x01, 0xe0, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x80, 0xf0, 0x00, 0x00, 0x01, 0xe0, 0x60, 0x81, 0xf8, 0x00, 0x00, 0x03, 0xf0, 0x60, 0x81, 0xf8, 0x00, 0x00, 0x03, 0xf0, 0x60, 0xc1, 0xf8, 0x00, 0x00, 0x03, 0xf0, 0x60, 0xc1, 0xf8, 0x00, 0x00, 0x03, 0xf0, 0x60, 0xc0, 0xf0, 0x00, 0x00, 0x01, 0xe0, 0x60, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe0, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0 }; void setup() { // Zeitzone: Parameter für die zu ermittelnde Zeit configTzTime(Zeitzone, Zeitserver); Serial.begin(9600); // auf serielle Verbindung warten while (!Serial); delay(1000); // WiFi starten WiFi.mode(WIFI_STA); WiFi.begin(Router, Passwort); Serial.println(“————————”); while (WiFi.status() != WL_CONNECTED) { delay(200); Serial.print(“.”); } Serial.println(); Serial.print(“Verbunden mit ”); Serial.println(Router); Serial.print(“IP über DHCP: ”); Serial.println(WiFi.localIP()); // Schriften von u8g2 tft zuordnen u8g2Schriften.begin(tft); // Zufallsgenerator starten randomSeed(analogRead(A0)); Serial.begin(9600); delay(500); Serial.println(“Bildschirm: ” + String(tft.height()) + ” x ” + String(tft.width())); // TFT starten tft.begin(); // Rotation anpassen tft.setRotation(2); // Bitmaps anzeigen tft.fillScreen(ILI9341_BLACK); tft.drawBitmap(1, 1, Kalender, 51, 60, ILI9341_WHITE); tft.drawBitmap(1, 90, Uhr, 50, 50, ILI9341_WHITE); tft.drawBitmap(10, 170, Thermometer, 34, 70, ILI9341_WHITE); tft.drawBitmap(1, 270, Regen, 60, 49, ILI9341_WHITE); // Sensor starten dht.begin(); } void loop() { // aktuelle Zeit holen time(&aktuelleZeit); // localtime_r -> Zeit in die lokale Zeitzone setzen localtime_r(&aktuelleZeit, &Zeit); // Temperatur lesen String Temperatur = String(dht.readTemperature()); // replace -> . durch , ersetzen Temperatur.replace(“.”, “,”); // Luftfeuchtigkeit lesen String Luftfeuchtigkeit = String(dht.readHumidity()); // replace -> . durch , ersetzen Luftfeuchtigkeit.replace(“.”, “,”); // nur den Bereich der Daten schwärzen tft.fillRect(60, 1, tft.width(), tft.height(), ILI9341_BLACK); u8g2Schriften.setForegroundColor(ILI9341_WHITE); u8g2Schriften.setBackgroundColor(ILI9341_BLACK); u8g2Schriften.setFont(u8g2_font_helvB24_tf); u8g2Schriften.setCursor(70, 45); // Tag: führende 0 ergänzen if (Zeit.tm_mday < 10) { u8g2Schriften.print(“0”); } u8g2Schriften.print(Zeit.tm_mday); u8g2Schriften.print(“.”); // Monat: führende 0 ergänzen if (Zeit.tm_mon < 9) { u8g2Schriften.print(“0”); } u8g2Schriften.print(Zeit.tm_mon + 1); u8g2Schriften.print(“.”); // Anzahl Jahre seit 1900 u8g2Schriften.print(Zeit.tm_year + 1900); u8g2Schriften.print(“ ”); u8g2Schriften.setCursor(70, 120); // Stunde: wenn Stunde < 10 -> 0 davor setzen if (Zeit.tm_hour < 10) u8g2Schriften.print(“0”); u8g2Schriften.print(Zeit.tm_hour); u8g2Schriften.print(“:”); // Minuten if (Zeit.tm_min < 10) u8g2Schriften.print(“0”); u8g2Schriften.print(Zeit.tm_min); // Messdaten anzeigen u8g2Schriften.setCursor(70, 210); u8g2Schriften.print(Temperatur + ” °C”); u8g2Schriften.setCursor(70, 300); u8g2Schriften.print(Luftfeuchtigkeit + ” %”); delay(10000); } |
Quellen
- Schriftarten von Adafruit
- Schriftarten von u8g2
- Adafruit Grafik-Bibliothek
- Online Grafiken in Arrays umwandeln
- Grafiken von openclipart.org
- NodeMCU WiFi-API
- Espressif WiFi-API
Verwandte Anleitungen
- BME280 ‑Messdaten anzeigen
- DHT11/DHT22 — Durchschnittstemperatur berechnen und auf einem OLED-Display anzeigen
- DHT11/DHT22 — Wetterdaten aufzeichnen
- DHT11/DHT22 — Wetterdaten mit Bluetooth-Modul übermitteln
- DHT11/DHT22 — Wetterstation LAN
- DHT11/DHT22 — Wetterstation Anzeige auf einem LCD
- DHT11/DHT22 — Wetterstation WiFi
- ESP — DHT Messdaten auf Waveshare 1,54 Zoll E‑Ink anzeigen
- ESP32-Wroom – BMP280/DHT Zeit und Messdaten auf TFT anzeigen
- Klimaanlage mit 12V-Lüfter und Transistor
Letzte Aktualisierung:







